Firmware Updates

Starlink does not publish an official firmware/software changelog. The firmware updates featured on this page are an effort of the Starlink community on Reddit. Information here could be incorrect, use it at your own risk.

Did your Starlink get a software update you don’t see on this list? Send us a message and we will add it!

Only the most recent updates are listed, from newest to oldest. Notable changes, if any, are in bold below the firmware version.

How to Check Your Starlink Software Version

To check which version of firmware/software your dish is running, open the Starlink App. Scroll to the bottom, then tap Advanced. The software version is listed under the Starlink section, labeled Software.

You can tell when the firmware was last updated by checking Uptime. Each time the firmware updates, Starlink reboots, and resets the Uptime counter. Updates usually occur overnight, around 1:00AM-4:00AM.

How to Update Starlink Firmware

Starlink users cannot manually update their firmware version. All updates are pushed from Starlink. Updates are typically rolled out in batches, meaning not every user will be updated the same day. It is also important to note that not every user will receive every update.

Sometimes, the Starlink app will ask if you would like to download and install a new firmware update. You can go ahead and update at that moment, or Starlink will automatically update overnight.

Starlink Software Update List

Page last updated on:

4/9/2024

d2d8c1b0-eccf-4d60-9a54-dd4ccfeb59fb.uterm_manifest.release

4/5/2024

b7164efb-5d17-4299-b2ff-c8bfa32eb99c.uterm_manifest.release

4/2/2024

a9c2a596-bd72-4ab5-bdea-ca64fbf64e0f.uterm_manifest.release

3/28/2024

3dca6b5d-2dbe-4eef-8091-75efdef3e5b9.uterm_manifest.release

This update appears to have fixed the 3rd party router issue some Gen 1 units were having

07819c94-b156-44e7-af5a-943bd9236d4c.uterm_manifest.release

bd2484b2-1008-42e0-9e8e-84c040981d38.uterm_manifest.release

3/24/2024

e0ca0555-425e-48fa-a66e-928535953414.uterm_manifest.release

3/21/2024

e1ced691-1127-4ef6-a931-6a93e1b828a1.uterm_manifest.release

3/20/2024

df494242-80b4-4667-aab5-b764f02411b0.uterm_manifest.release

This update is knocking Gen 1 units that are using 3rd party routers offline. Various reports show connecting the Starlink router back to the system is a temporarily solution. You can also try to reboot the dish to see if that will fix the connection with the 3rd party router.

a8c571f6-6dcc-4179-9df3-53936b7430c4.uterm_manifest.release

Similar Gen 1 issue reported with this software version. Use the Starlink router if you can.

3/18/2024

20585372-17cf-4b05-be0b-9b96aa048f21.uterm_manifest.release

3/17/2024

ce23e390-1d76-4e03-92ec-a454781cb6e8.uterm_manifest.release

4450d84b-7a9b-4e9f-8a1d-22e74f00e51b.uterm_manifest.release

3/16/2024

2d8082d2-ff09-4f14-b03a-39eba1fe24c1.uterm_manifest.release

0768b80c-d57a-4b46-b233-38f92272f889.uterm_manifest.release

3/15/2024

33a23d0b-74c7-4431-b74c-404eca092f10.uterm_manifest.release

3/14/2024

e8f121a1-0ffa-4bfa-afd4-1bad542edd46.uterm_manifest.release

3/7/2024

760b9801-f43b-40b8-b2f7-2d38da1dcf26.uterm_manifest.release

3/6/2024

6c26585d-bad1-4c31-b0ba-99a54b0bc337.uterm_manifest.release

3/4/2024

92aef788-474d-4e40-b968-519b631ff55f.uterm_manifest.release

8ff626cc-6611-4445-bce4-4a0acaef44b6.uterm_manifest.release

3/2/2024

ce1bd935-116e-470a-a0dd-a002c9b7d27a.uterm_manifest.release

868c6d0e-78cb-44fa-bcae-c4b405abfcf0.uterm_manifest.release

3/1/2024

5405bd7e-9e08-4063-9866-0c36acb17d81.uterm_manifest.release

2/29/2024

e580c6be-ce09-48d0-a66d-7dd4af126a17.uterm_manifest.release

2/28/2024

876e1d21-a184-4802-9186-40c2b24470c2.uterm_manifest.release

2/27/2024

605271f8-2a6c-44ae-8654-cb6cceba8bf6.uterm_manifest.release

20 thoughts on “Firmware Updates”

Leave a Comment